I think that's what I'm going to do. Did you have to add a hanger on the over axle dump?
Printable View
I think that's what I'm going to do. Did you have to add a hanger on the over axle dump?
No I ordered a cheap 7” tip and added it to keep the exhaust off the tires
Sent from my iPhone using Tapatalk
I've got an FTE resonator that I'm going to try in place of the muffler and try the axle dump. I'll let you know how it sounds.
I just run my Flo Pro TBE 5” just first pipe connected to turbo love the sound :rockon:
I thought I read on the Flo-Pro website, they recommend a track weld at the joints. The MBRP exhaust on my Jeep had a rattle. I changed out the clamps, still rattled. Hit the joints with a tack weld, no more rattle. May be helpful. Good luck.
Sent from my XT1650 using Tapatalk
Did you check clearance on the pipe that goes to the turbo and also pipe the last pipe that goes over axle. My experience when I installed mine then went to tighten was that it would get next to frame. I loosened and twisted pipe a little and retightened and never had a problem. Just something to look for, good luck.
So after six months I had time to look at my exhaust. Originally I had a bad vibration with the tail pipe installed I pulled it off and have been running with it dumped over the axle and a 7” tip.
I reinstalled the tail pipe cut it back threw my tip on it and the vibration went away.
Maybe the weight of the tip did it? Just thought I would post my findings and maybe help someone out.
Sent from my iPhone using Tapatalk