Re: Adding Reverse Lights?
Quote:
Originally Posted by
Joe Froe
I ran it along the frame from the back and went into a rubber grommet thru the floor under the driver seat. I already had wires going thru for my amp so it was just easiest for me. Then i ran my power wire under the dash thru the firewall. I sadly do not still have the truck to double check for u. But i know i had a good bit of extra wire wrapped up and ziptied and tucked away. But for the way i done it i didnt have to add any wire to the harness.
Thanks. I decide to just buy some male/female connectors and 16ga wire to act as an "extension". Cost around $50 total on amazon. Just sucks the harness from Rigid wasn't long enough...
4 Attachment(s)
Re: Adding Reverse Lights?
Hey all first post on this forum coming from cf, stumbled on a thread a couple years ago about bashing ray, totally agree with everyone here btw but anywho, I have flush mounted lights in my bumper I found myself wanting light pointed more outward so I can actually see them in my mirror thought I’d post a pic. Tucked them somewhat out of site, looks pretty clean I think.
Re: Adding Reverse Lights?
Quote:
Originally Posted by
Izzy2888
Hey all first post on this forum coming from cf, stumbled on a thread a couple years ago about bashing ray, totally agree with everyone here btw but anywho, I have flush mounted lights in my bumper I found myself wanting light pointed more outward so I can actually see them in my mirror thought I’d post a pic. Tucked them somewhat out of site, looks pretty clean I think.
Very nice lights my friend! Glad to have ya here.
Re: Adding Reverse Lights?
https://uploads.tapatalk-cdn.com/201...4720229f90.jpg
Turned out good. My driveway has an angle so hard to really see the distance of light but it will work great! Connectors and wire from Amazon worked well.
Sent from my iPhone using Tapatalk Pro
Re: Adding Reverse Lights?
Quote:
Originally Posted by
Izzy2888
Hey all first post on this forum coming from cf, stumbled on a thread a couple years ago about bashing ray, totally agree with everyone here btw but anywho, I have flush mounted lights in my bumper I found myself wanting light pointed more outward so I can actually see them in my mirror thought I’d post a pic. Tucked them somewhat out of site, looks pretty clean I think.
Nice setup on your lights and welcome friend!
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....[emoji106][emoji41]
Re: Adding Reverse Lights?
Quote:
Originally Posted by
Izzy2888
Hey all first post on this forum coming from cf, stumbled on a thread a couple years ago about bashing ray, totally agree with everyone here btw but anywho, I have flush mounted lights in my bumper I found myself wanting light pointed more outward so I can actually see them in my mirror thought I’d post a pic. Tucked them somewhat out of site, looks pretty clean I think.
Nice set up @Izzy2888 .. and :welcome: to the forum .. how 'bout getting to the Introduction thread and let everyone know you joined !