2 Attachment(s)
The New Drag Link Has Arrived!
Just throwing one out there for @Dude's Diesel Performance.
I just received my synergy drag link and it's one nice piece.
This will definitely cover the recall on the ram 2500.
Clayton is a good man, very good on response time and helps the guys and gals out on this forum.
Thanks again.
Here is a little glamour shot.
Attachment 8416
Attachment 8417
Re: The New Drag Link Has Arrived!
Quote:
Originally Posted by
DIESELWRKS
Align your steering wheel; if it's not straight before you do that, put a little bit of lock tight on the threads, and after you tighten it, you can put safety wire in front of the nut, then wrap it across the other nut.
Another option instead of wire is using stainless hose clamps on the bar next to the nut.
I know this is an old post but I did the exact same thing about a year ago, called dealership today and welding the jam nuts is still their fix so I ordered a Synergy track bar from DDP.
Re: The New Drag Link Has Arrived!
I got mine a couple of years ago when the recall began.
I did get reimbursed for it back in the day.
I did have to order a new tie rod end on the one side already (I replaced both preventatively), but I chalked it up to the shop not installing the retaining clips on the one side when they first installed it; it started clunking I assume with grit getting in there.
I replaced both sides and replaced my Synergy box brace pillow bearing, and the front end is quiet and tight again.