Re: Leveling kit and 35’s
Let's ask @Custom Offsets?
[emoji830]Join as a Lifetime Platinum Member Today[emoji830]
Re: Leveling kit and 35’s
My 2017 is leveled with 35s and no rub. Not sure what the offset of the rims are though.
Re: Leveling kit and 35’s
Quote:
Originally Posted by
jhlawson80
I have a 2014 ram 2500. I am looking at a 2 inch bds leveling kit and I want 35x12.5/20 with -12 offset. My question is will there be a rub. I have looked on the custom offset page and seen many just like my truck and tire setup. Some rub and some do not. Wondering if anybody on here has an insight. Thanks
Sent from my iPhone using Tapatalk
I dont reckon you would rub. If you do its not going to be anything but a little plastic that needs tucked back or trimmed. I bet it would look pretty good too. My personal opinion a leveling kit on 35s on these truck i dont think youd need to worry about major rubbing until you went with a 12 wide wheel or wider. But i havent done it so i cant say for sure. I run stock height with 20x10 -24mm offset on 305 55 20 and have minimal rubbing on the fender liner so you should be good
Re: Leveling kit and 35’s
Awesome thanks, this is the combo I am gonna get.
I am planning on doing a lot to my truck this spring and summer.
I think it will look good. I am also gonna add a stealth module to increase performance.
https://uploads.tapatalk-cdn.com/201...db6ee7bb61.jpg
https://uploads.tapatalk-cdn.com/201...36bbd39fb7.jpg
Sent from my iPhone using Tapatalk
Re: Leveling kit and 35’s
I run a 2" bds leveling kit 20x10-18, 35s. On 15 ram 2500 4x4. I did rub a little bit almost at full turn theres a black trim piece close to driver and passenger door I took it off and took a dremel. Grind it down a little and now I dont rub at all.
1 Attachment(s)
Re: Leveling kit and 35’s
I run those same tires with a 2.5" kit and they are terrible. They rub a little but not bad. I've never had them offroad so can't say performance wise there but on road sucks. They have no grip in the rain, loud, and ride like a tractor. Attachment 7722