Printable View
So I’m not very versed in the electrical stuff on my 2006. A/c went out long time ago and it’s never been a priority to fix it. Well I’ve got some parts on the way and I started diagnosing it myself and at the 2 pin connector to compressor I have constant 10v to 1 pin. Weather the ac button is on or off! Do I have a problem with my main board where the fuses are????
Sent from my iPhone using Tapatalk Pro
The 10V is low. The computer switches the ground side. Not the positive side. So voltage is always there
I would double check that voltage. Maybe replace the fuse and make sure the connection on the high/low limit switch is good. I doubt it, but the system may be ready to lock out the compressor on low pressure
Ok I’ll check that. I checked the compressor unplugged at the 2 pin connector and don’t have any resistance at all. I think there is a pressure sensor right by the compressor on one of the a/c hard lines. I’ll check that connection.Quote:
Originally Posted by Polaraco
Sent from my iPhone using Tapatalk Pro
I just did mine last year, but forget already where it was. It's over there somewhere.Quote:
Originally Posted by Sisupower
If you have to open the system, get a new reciever/dryer.
Yea I’ve got a new compressor, dryer and the line with orfise tube in it i think...Quote:
Originally Posted by Polaraco
Sent from my iPhone using Tapatalk Pro
Wow! Going all out. Sanden compressors are the best. Just sayinQuote:
Originally Posted by Sisupower
I put an evap in mine last year and just did the hoses and dryer. Mine's an 03. It's a pita
Yea my wife got it for me for Father’s Day with other gun stuff and fishing stuff. She knew I wasn’t going to get it myself so she got it for me!!
Sent from my iPhone using Tapatalk Pro
That’s a good wife :cool:Quote:
Originally Posted by Sisupower
Lucky bas. . . . .Quote:
Originally Posted by Sisupower